Epoxy Resin Multi Fit Sinks
-
Epoxy Resin Multi fit Sink – S15 406mm x 305mm x 203mm deep
£172.00 + VATA standard range of epoxy resin sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.
An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as ‘underslung’. This fitment is adequate for many general laboratory applications.
The base of the sink slopes to a hole rebated to accept a waste fitting.
Sinks can also be drilled to accept an overflow fitting.
-
Epoxy Resin Multi Fit Sink – S25 456mm x 380mm x 216mm deep
£172.00 + VATA standard range of epoxy resin sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.
An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as ‘underslung’. This fitment is adequate for many general laboratory applications.
The base of the sink slopes to a hole rebated to accept a waste fitting.
Sinks can also be drilled to accept an overflow fitting.
-
Epoxy Resin Multi fit Sink – M16 600mm x 450mm x 300mm deep
£250.40 + VATA standard range of epoxy resin sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.
An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as 'underslung'. This fitment is adequate for many general laboratory applications.
The base of the sink slopes to a hole rebated to accept a waste fitting.
Sinks can also be drilled to accept an overflow fitting.
-
Epoxy Resin Multi Fit Sink – S30 456mm x 380mm x 296mm deep
£180.00 + VATA standard range of epoxy resin sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.
An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as ‘underslung’. This fitment is adequate for many general laboratory applications.
The base of the sink slopes to a hole rebated to accept a waste fitting.
Sinks can also be drilled to accept an overflow fitting.
-
Epoxy Resin Multi fit Sink – S5 356mm x 254mm x 152mm deep
£156.00 + VATA standard range of epoxy resin sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.
An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as ‘underslung’. This fitment is adequate for many general laboratory applications.
The base of the sink slopes to a hole rebated to accept a waste fitting.
Sinks can also be drilled to accept an overflow fitting.
-
Epoxy Resin Multi fit Sink – M10 400mm x 400mm x 300mm deep
£208.80 + VATA standard range of epoxy resin sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.
An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as ‘underslung’. This fitment is adequate for many general laboratory applications.
The base of the sink slopes to a hole rebated to accept a waste fitting.
Sinks can also be drilled to accept an overflow fitting.
-
Epoxy Resin Multi-fit Sink – M6 300mm x 300mm x 200mm deep
£140.00 + VATA standard range of epoxy resin sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.
An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as ‘underslung’. This fitment is adequate for many general laboratory applications.
The base of the sink slopes to a hole rebated to accept a waste fitting.
Sinks can also be drilled to accept an overflow fitting.
-
Epoxy Resin Multi fit Sink – M3 300mm x 200mm x 200mm deep
£117.60 + VATA standard range of epoxy resin sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.
An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as ‘underslung’. This fitment is adequate for many general laboratory applications.
The base of the sink slopes to a hole rebated to accept a waste fitting.
Sinks can also be drilled to accept an overflow fitting.
-
Epoxy Resin Multi fit Sink – M7 350mm x 300mm x 200mm deep
£154.40 + VATA standard range of epoxy resin sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.
An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as ‘underslung’. This fitment is adequate for many general laboratory applications.
The base of the sink slopes to a hole rebated to accept a waste fitting.
Sinks can also be drilled to accept an overflow fitting.
-
Epoxy Resin Multi fit Sink – S50 610mm x 406mm x 203mm deep
£248.80 + VATA standard range of epoxy resin sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.
An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as ‘underslung’. This fitment is adequate for many general laboratory applications.
The base of the sink slopes to a hole rebated to accept a waste fitting.
Sinks can also be drilled to accept an overflow fitting.
-
Epoxy Resin Multi fit Sink – S55 65mm x 381mm x 254mm deep
£248.80 + VATA standard range of epoxy resin sinks and troughs are moulded complete with a fixing flange in order to simplify fitment and to optimise the integrity of the joint with the worktop.
An overhang (underslung) sink is bonded and screwed to the underside of a worktop with the worktop slightly overhanging the sink opening. This type of fitment is also commonly referred to as ‘underslung’. This fitment is adequate for many general laboratory applications.
The base of the sink slopes to a hole rebated to accept a waste fitting.
Sinks can also be drilled to accept an overflow fitting.
