Shop
-
Vulcathene Dilution Recovery Trap
£103.98 + VATVulcathene Dilution Recovery Trap ( 1 -1/2″ BSP Connection )
Easily emptied by unscrewing the base from th etrap
Volume 2.3 litres
Height 325mm
-
Watersaver Double Water Lab Tap, Bench Mounted
£137.21 + VATDouble Water Tap, Bench Mounted – Pillar Bib Tap with two cold or hot water outlets. The tap comes with a serrated nozzle, if you require an aerator nozzle instead or if you need a Pipe Interrupter to prevent backflow please select from below.
-
Brownall Mixer Tap with Wrist Action Levers
£217.30 + VATThis tap is supplied with aerator nozzle but the following alternatives are available if required:
-
Vulcathene Circular Drip Cup
£24.29 + VATVulcathene Circular Drip Cup ( 1 -1/2″ BSP Connection )
Diameter 102mm
Height 136mm
-
Brownall Fixed Swanneck Hot Water Tap
£81.23 + VATThis tap is available with the following optional extras:
-
Tin of Solvent Weld
£29.25 + VAT -
Brownall Double Pillar Angle Water Tap
£124.54 + VATThis tap is available for either hot or cold and with the optional extras below:
-
Vulcathene 92.5 deg Equal Sweep Tee – 38mm
£25.49 + VATVulcathene 92.5 deg Equal Sweep Tee ( 38mm )
-
Watersaver Single Rigid Hot Water Lab Tap, Wrist Blade Handle
£70.11 + VATSingle Water Tap, Bench Mounted with wrist action handle. The tap comes with a serrated nozzle, if you require an aerator nozzle instead or if you need a Pipe Interrupter to prevent backflow please select from below.
-
110mm PVC Volume Control Damper (Beck)
£101.10 + VATPVC Volume Control Damper by BECK for Industrial Applications
- Internal Diameter: 110mm
- Colour: Grey
- See below for other sizes relevant to drawing
-
Arboles Monobloc Mixer Tap with Swanneck
£105.83 + VATMonobloc mixer tap with swanneck
Removable Serrated Nozzle
-
WaterSaver Lift & Turn Handle
£8.87 + VATMolded nylon lift & turn handle for BT2920 gas tap models.
-
Broen-Lab Two Way Lift & Turn Gas Tap – Wall / Panel Mount
£72.26 + VATBROEN-LAB two way lift & turn gas tap, wall / panel mounted
-
Arboles Fixed Swanneck Lab Tap ( Left Hand ) HW
£66.46 + VATFixed Swanneck Lab Tap ( Left Hand ) HW
Hot Water
Left Hand Valve
Fixed Serrated Nozzle
-
Polypropylene Lab Sink 552mm x 400mm x 237mm
£82.00 + VAT- High Quality Polypropylene Sink
- Temperature range: 0-80°C
- Self-draining base
- Standard colours: Black, White
- Extremely durable.
-
Arboles Pillar Bib Lab Tap Removable Nozzle
£74.00 + VATPillar Bib Lab Tap with Removable Serrated Nozzle. This tap can be supplied with an anti siphon nozzle to prevent backflow or an aerator nozzle if required.
-
WaterSaver Tap Handwheel
£10.21 + VATMolded nylon hooded style handle for water taps and valves for WaterSaver lab taps.
Handwheel Colour: Green
-
Watersaver Brass Headworks BT Series
£15.39 + VATWatersaver Brass Headworks BT Series
Note: For standard taps only. Not suitable for blade handled taps or other specialist taps
-
Epoxy Resin Drop on Sink – SS6-DO 350mm x 300mm x 200mm deep
£164.00 + VATDrop-on sinks are designed to be easily fitted to any type of worktop material.
They have self-rimming flanges which will conceal the core layer of a laminated worktop.
The sink is self-supporting on its integral flange and can be bonded in place with silicone sealant or Epoxy Resin grout.
The same raised flange has a smooth 45 face to the outside that will allow the user to wash liquids over it but prevent accidental spillage of materials into the sink.
The base of the sink slopes to a hole rebated to accept a waste fitting. Sinks can also be drilled to accept an overflow fitting.
-
Brownall Mixer Tap
£182.19 + VATThis tap is supplied with aerator nozzle but the following alternatives are available if required:
-
Brownall / Broen Fixed Serrated Nozzle 3/8″
£5.40 + VATBrownall polypropylene anti-splash serrated hose end for water.
For Brownall / Broen pillar bib taps.
G3/8″ male fitting.
-
Epoxy Resin Drop on Sink – SM8-DO 450mm x 365mm x 200mm deep
£188.00 + VATDrop-on sinks are designed to be easily fitted to any type of worktop material.
They have self-rimming flanges which will conceal the core layer of a laminated worktop.
The sink is self-supporting on its integral flange and can be bonded in place with silicone sealant or Epoxy Resin grout.
The same raised flange has a smooth 45 face to the outside that will allow the user to wash liquids over it but prevent accidental spillage of materials into the sink.
The base of the sink slopes to a hole rebated to accept a waste fitting. Sinks can also be drilled to accept an overflow fitting.
-
Laboratory Scaffolding S-Connector
£22.95 + VATScaffold clamp suitable for 1/2″ rod.
Suitable for installation in fume cupboards and laboratory frames.
316 Grade Stainless Steel.
Manufactured in UK -
Fireclay Lab Sink 360mm x 280mm x 150mm
£138.60 + VATGlazed Laboratory Sink 360mm x 280mm x 150mm
Hard wearing, durable, alkali and acid resistant
Fixing clips available
-
Arboles Mixer Lab Tap with Swivel Swanneck
£137.35 + VATMixer Lab Tap with Swivel Swanneck
Removable Serrated Nozzle
-
Arboles Mixer Lab Tap with Swivel Swanneck
£131.53 + VATMixer Lab Tap with Swivel Swanneck
Removable Aerator Nozzle ( This has an M22 thread when the aerator nozzle is removed )
-
Polypropylene Lab Sink 345mm x 345mm x 235mm
£68.00 + VAT- High Quality Polypropylene Sink
- Temperature range: 0-80°C
- Self-draining base
- Standard colours: Black, White
- Extremely durable.
-
Watersaver Three-Way Water Lab Tap, Bench Mounted
£180.41 + VATThree-Way Water Tap, Bench Mounted – Pillar Bib Tap with three cold or hot water outlets. The tap comes with a serrated nozzle, if you require an aerator nozzle instead or if you need a Pipe Interrupter to prevent backflow please select from below.
-
200mm PVC Drilled Flange Socket
£24.28 + VAT- Internal Diameter: 200mm
- Colour: Grey
- See other sizes relevant to drawing below
-
Arboles Two Way Lab Bib Tap
£113.99 + VATTwo Way Lab Bib Tap
Fixed Serrated Nozzles
Single Water Connection ( Not Mixer Tap )
-
Arboles Fixed Swanneck Lab Tap ( Left Hand ) HW
£71.22 + VATFixed Swanneck Lab Tap ( Left Hand ), hot water with removable serrated nozzle. This tap can be supplied with an anti siphon nozzle to prevent backflow or an aerator nozzle if required.
-
Brownall Monobloc Mixer Tap with Wrist Action Levers
£166.56 + VATThis tap is available with the following optional extra:
-
Arboles Swivel Swanneck Lab Tap
£72.76 + VATSwivel Swanneck Lab Tap suitable for either hot or cold water with removable nozzle. This tap can be supplied with an anti siphon nozzle to prevent backflow or an aerator nozzle if required.
-
Laboratory Scaffold Boss
£18.95 + VATScaffold boss suitable for 1/2″ scaffold rod.
Machined from 316 grade stainless steel.
Made in the UK. -
Epoxy Resin Drop on Sink – SEL16-DO 600mm x 450mm x 300mm deep
£274.40 + VATDrop-on sinks are designed to be easily fitted to any type of worktop material.
They have self-rimming flanges which will conceal the core layer of a laminated worktop.
The sink is self-supporting on its integral flange and can be bonded in place with silicone sealant or Epoxy Resin grout.
The same raised flange has a smooth 45 face to the outside that will allow the user to wash liquids over it but prevent accidental spillage of materials into the sink.
The base of the sink slopes to a hole rebated to accept a waste fitting. Sinks can also be drilled to accept an overflow fitting.
-
Polypropylene Lab Sink 807mm x 469mm x 330mm
£231.50 + VAT- High Quality Polypropylene Sink
- Temperature range: 0-80°C
- Self-draining base
- Standard colour: Black
- Extremely durable.
-
Fireclay Lab Sink 585mm x 380mm x 230mm
£201.00 + VATGlazed Laboratory Sink 585mm x 380mm x 230mm
Hard wearing, durable, alkali and acid resistant
Fixing clips available
-
Vulcathene Flexible Drain Hose
£154.12 – £175.72 + VATStandard 38mm flexible drain connectors manufactured from polypropylene
The ends are pre-grooved with nut and olive supplied
Lengths 1000mm, 1500mm and 2000mm
